Panasonic HDC-HS80 Webcam User Manual


 
- 102 -
Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV multi cable.
Images are dubbed in standard quality.
Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit to a video device and then change the mode to
.
2 Start playback on this unit.
3 Start recording on the connected device.
To stop recording (dubbing), stop playback on this unit after stopping recording on the
recorder.
If the date and time display and function indication are not wanted, cancel them before
dubbing. (l 32, 86)
Dubbing in standard picture quality
Change the video input on the
video device and TV that this
unit is connected to.
The channel set will differ depending
on the terminal to which the unit is
connected.
See the operating instructions of the
video device for details.
Insert the plugs as far as they will go.
Do not use any other AV multi cables
except the supplied one.
A AV multi cable (supplied)
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction of the device you are connecting to or read
the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
AV MULTI