Panasonic HDC-SD80 Webcam User Manual


 
- 33 -
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to or .
Depending on the recording conditions, start time may be longer than 1 second.
In the quick power on mode, the zoom magnification becomes 1k.
This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is
reopened.
Quick start will not work if there is no SD card inserted.
/
Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
Change the mode to or .
1 Set [QUICK START] to [ON].
2 Close the LCD monitor while the mode is
set to or .
The status indicator A flashes green and the unit
goes into quick start standby mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
When in quick start standby mode about 80% of the power used in recording pause
mode is being consumed, so the recording time will be reduced.
Quick start standby mode is cancelled if
jabout 5 minutes elapsed
jmode is set to
Depending on the recording conditions and menu settings, time for quick start may be
longer than 0.6 seconds.
It may take some time for automatic white balance to adjust.
In the quick start mode, the zoom magnification becomes 1k.
If [ECONOMY] (l 32) is set to [5 MINUTES] and the unit automatically goes into quick
start standby mode, close the LCD monitor and then open it again.
Turn the unit off using the power button.
[QUICK POWER ON]
[OFF]/[ON]
[QUICK START]
[OFF]/[ON]