Filter
Top Products
38
Loading Documents on the Flatbed
5
Close the document cover gently.
•
If the document cover is slammed, the
document will move and may not be
scanned properly.
• Do not open or press down on the
document cover during scanning.
• Do not look directly at the light.
(You may damage your eyes.)
• Be sure to close the document cover
before use.
• After scanning, open the document cover
and remove the document.
∫∫
∫∫
When scanning with the flatbed repeatedly
The ADF is heavy so when scanning with the flatbed repeatedly, separate the ADF and document cover.
1
Pull the exit document stopper towards
you, pull the front door release under
the hopper, separate the ADF and
document cover, and lift up the ADF to
open.
2
Perform operation steps 1 through 5
for scanning with the flatbed one time.
(See pages 37 and 38.)
ADF
ADF
Exit document stopper
Front door release
(Inside the front door.)
Document cover
Hopper
Front door release