Filter
Top Products
52
Replacing Consumable Roller Modules
If “Warning Replace Roller” message is displayed on the LCD, replace the paper feed roller module, separation
roller module and retard roller module at the same time.
1
Confirm that the manual feed selector
is set to “AUTO”, turn the power off and
unplug the power cord.
•
If the power is turned off with the manual
feed selector set to “MANUAL”, the retard
roller module cannot be removed.
2
Using your hand, pull the ADF door
release towards you, then open the
ADF door completely.
3
Using your fingers, hold the paper feed
conveyor and pull it towards you to
open it.
•
When the paper feed conveyor is pulled
towards you, the click-stop mechanism
will be released.
ADF door release
(Inside the ADF door.)
ADF door
ADF door
ADF door release
Paper feed
conveyor
≤ : Off position
Power switch