Filter
Top Products
47
Cleaning the Unit
7
Close the ADF door.
•
Push both sides of the ADF door down
gently until it clicks into place.
• Since the roller are located on the left
side of the ADF door, there is more
weight on the left side.
Therefore, it is important to note that the
door needs to have tension evenly
divided to close it properly.
∫∫
∫∫
Cleaning the scanning section glass, CIS glass, sensor plate, sensor roller,
document sensors, double feed detection sensors and paper detection
sensor
1
Turn the power off.
2
Using your hand, pull the ADF door
release towards you, then open the
ADF door completely.
ADF door release
ADF door release
(Inside the ADF door.)
ADF door
ADF door