Filter
Top Products
57
Features Summary
Basic features!
Programming table
Code
#01
To set the date and time.
SET DATE & TIME
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 19 for details.
See page 20 for details.
See page 22 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
If you are using the unit with an
answering machine, set to
more than 4 (p. 46).
#02
To set your logo.
YOUR LOGO
(Up to 30
characters)
Display & Feature Settings How the unit operates
#03
To set your facsimile telephone
number.
YOUR FAX NO.
(Up to 20
digits)
#04
To print and check the sending
report for fax transmission results
(p. 37).
SENDING REPORT
ERROR
ON
OFF
#06
To change the number of rings
before the unit answers a call in
FAX ONLY mode.
FAX RING COUNT
2, 3, 4, 5,
6, 7, 8, 9
ON / ID=11
OFF
#12
If you are using the unit with an
answering machine, activate this
feature, and set the remote
activation ID to secure the remote
operation for the answering
machine.
REMOTE TAM ACT.
To select “ON” and enter ID:
1. Press .
2. Rotate and select this
feature.
3. Press .
4. Rotate to select “ON”.
5. Press .
6. Enter your ID from 1 to 5 digits,
using 0–9, and #.
7. Press .
8. Press .
MENU
SET
SET
EASY DIAL
SET
EASY DIAL
MENU
(The default setting is in bold type.)