Filter
Top Products
Features Summary
61
Code Display & Feature Settings How the unit operates
(The default setting is in bold type.)
#68
ECM stands for Error Correction
Mode. To send a fax even if there
is static interference on the
telephone line.
ECM SELECTION
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
●
If documents are in memory, clear
them before making the setting
(p. 44).
#44
To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE ALERT
ON
OFF
#49
To answer a call with an extension
telephone in TEL/FAX mode
(p. 49).
AUTO DISCONNECT
ON /
CODE= 0
OFF
1. Follow steps 1–3 on page 60.
2. Rotate to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
MENU
SET
SET
EASY DIAL
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
#46
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV
ON
OFF
“ON”: You do not have to press
for fax reception.
FAX START
#58
To send or copy a document with
faint or dark writing, set this feature
before starting transmission or
copying.
ORIGINAL
NORMAL
LIGHT
DARKER
“NORMAL”: Used for normal
writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
●
This feature will return to the
normal mode after transmission
or copying.
See page 53 for details.
#70
If you have a pager and wish to
know when your unit receives a
fax, activate this feature.
FAX PAGER CALL
ON
OFF