Filter
Top Products
Feature & Display
Features Summary
85
Code Settings How the unit operates
1. Follow steps 1 and 2 on page 84.
2. Enter a 3-digit number except a
number using digits 0 or 7.
3. Press .
4. Press .
MENU
SET
#51
Setting the mailbox 1 password
If you wish to prevent other users
from retrieving messages, program
a password for mailbox 1.
BOX1 PASSWORD
ID=
ID=555
1. Follow steps 1 and 2 on page 84.
2. Enter a 3-digit number except a
number using digits 0 or 7.
3. Press .
4. Press .
MENU
SET
#52
Setting the mailbox 2 password
If you wish to prevent other users
from retrieving messages, program
a password for mailbox 2.
BOX2 PASSWORD
ID=
ID=555
#44
Setting the memory reception
alert
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
RECEIVE ALERT
MODE=ON [±]
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with paper to print the
stored document. The beeps will
stop.
#46
Setting the friendly reception
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV
MODE=ON [±]
ON
OFF
“ON”: You do not have to press
for fax reception.
FAX/START
ON
OFF
Voice guidance examples:
“
Start transmission.
”
“
Transmission is complete.
”
“
Transmission has failed.
”
“
Transmission has been
interrupted.
”
“
Start reception.
”
etc.
Setting the fax voice guidance
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
●
To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX GUIDANCE
MODE=ON [±]
#47
ON
OFF
ERROR
(The default setting is in bold type.)