Filter
Top Products
Features Summary
62
Code Display & Feature Settings How the unit operates
#78
If you use an extension telephone
in TEL/FAX mode, select the
desired number of rings of the
extension telephone.
TEL/FAX RING
2, 3, 4, 5, 6,
7, 8, 9
#80
To reset on advanced features to
their default settings.
SET DEFAULT
YES
NO
See pages 48 and 49 for details.
1. Follow steps 1–3 above.
2. Rotate to select
“YES”.
3. Press .
4. Press again.
5. Press .
MENU
SET
SET
EASY DIAL
#77
To change the receive mode in the
AUTO ANSWER setting.
AUTO ANSWER
FAX ONLY
TEL/FAX
“FAX ONLY”: Facsimile only mode
(p. 45)
“TEL/FAX”: Telephone/Facsimile
mode (p. 48, 49)
(The default setting is in bold type.)
#79
To save on toner consumption.
TONER SAVE
ON
OFF
“ON”: The toner cartridge will last
longer.
●
This feature may reduce print
quality.
You can confirm the status of the
other party’s machine.
●
If the ring back tone continues, the
other party’s machine may not be a
facsimile or may have run out of
paper. Check with the other party.
●
The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
Advanced features (cont.)!
How to set menu options
Programming table (cont.)
Note:
●
Step 4 may be slightly different depending on the
feature.
●
See page 56 for more details.
1. Press .
2. Rotate until the following is
displayed.
Display:
Press and rotate until
the desired feature is displayed.
3. Press .
SET
EASY DIAL
SET
ADVANCED MODE
EASY DIAL
MENU
4. Rotate until the desired
setting is displayed.
5. Press .
6. Press .
MENU
SET
EASY DIAL