Panasonic KX-FL501AL Fax Machine User Manual


 
66
Operations
When a function does not work, check here
before requesting help!
General
Problem
I cannot make and receive
calls.
I cannot make calls.
The unit does not work.
The unit does not ring.
The other party complains
they only hear a fax tone and
cannot talk.
The button
does not function properly.
The receive mode does not
function properly.
During programming, I cannot
enter the code or ID number.
The unit beeps.
REDIAL/PAUSE
The power cord or telephone line cord is not connected.
Check the connections (p. 18).
If you used a splitter to connect the unit, remove the
splitter and connect the unit to the wall jack directly. If the
unit operates properly, check the splitter.
The dialling mode setting is wrong. Change the setting of
feature #13 (p. 58) (KX-FL501AL only).
Disconnect the unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel
to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
The ringer volume is set to off. Adjust it (p. 23).
FAX ONLY mode is set. Tell the other party the number is
only used for faxes.
Change to TEL mode (p. 44) or TEL/FAX mode (p. 48).
If this button is pressed during dialling, a pause will be
inserted. If pressed immediately after a dial tone is
obtained, the last number dialled will be redialled.
A Distinctive Ring pattern of feature #31 is set (p. 60).
TEL/FAX mode is set (p. 48, 49).
All or part of the numbers are the same. Change the code
or ID number of features #12 (p. 57), #41 (p. 60) and #49
(p. 61).
Recording paper has run out. Press to stop the
beeps and install paper.
STOP
Cause & solution
Fax – sending
Problem
The telephone line cord is connected to the EXT jack on
the unit. Connect to the LINE jack (p. 18).
The other party’s fax machine is busy or has run out of
recording paper. Try again.
The other party’s machine is not a facsimile. Check with
the other party.
The other party’s fax machine rings too many times. Send
the fax manually – dial the number, confirm the fax tone,
then press .
FAX START
Cause & solution
I cannot send documents.
(continued)