Filter
Top Products
39
Sending Faxes
Sending the same document to pre-programmed parties
1
Insert the document FACE DOWN.
●
If necessary, press
repeatedly to select the desired setting
(p. 32).
2
Press the desired (1–2) or
.
●
You can also use . Display the
desired key name, and press
.
Example:
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
(see below).
<BROADCAST1>
FAX START
MANUAL BROAD
RESOLUTION
FACE DOWN
FACE DOWN
Display
RESOLUTION
STOP
FAX START
SET
BROADCAST
MANUAL BROAD
EASY DIAL
Note:
●
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialled up to 5 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press while the unit displays the
following message.
Display:
●
The display will show the following.
2. Press .
SET
YES:SET/NO:STOP
SEND CANCELLED?
BROADCASTING
STOP
NO.
01
02
03
04
Mike
Peter
Sam
Kim
USAGE TIME
01'10
01'08
01'09
01'10
004'37
PAGES
02
02
02
02
008
OK
OK
OK
OK
START TIME
10 Jan. 2001 09:36AM
YOUR LOGO :
YOUR FAX NO. :
10 Jan.09:31AM
10 Jan.09:33AM
10 Jan.09:34AM
10 Jan.09:35AM
TOTAL
RESULT
OTHER FACSIMILE
BROADCAST REPORT 1
Sample of a broadcast sending report
BROADCAST
EASY DIAL
Note:
●
If you select “24H” for the clock display (feature #19 on page 55), the time is shown using a 24 hour clock
(military time).