Filter
Top Products
65
Operations
Fax – receiving (cont.)
Problem
●
The other party placed the document in their fax machine
the wrong way. Check with the other party.
●
The glass or rollers are dirty. Clean them (p. 74).
●
The other party sent a faint document. Ask them to send a
clearer copy of the document.
●
Some paper has instructions recommending which side to
print on. Try turning the paper over.
●
You may have used paper with a cotton and/or fiber content
that is over 20%, such as letterhead or resume paper.
●
The remaining toner is low. Replace the toner cartridge
(p. 68).
●
We recommend you replace the drum unit every third time
you replace the toner cartridge
(p. 68)
. To check the drum
life and quality, please print the printer test list (p. 76).
●
The toner save mode of feature #79 is on (p. 59).
Cause & solution
A blank sheet is ejected.
A white line or a dirty pattern
appears on your recording
paper.
The printing quality is poor.
I cannot select the desired
receive mode.
The other party complains that
they cannot send a document.
Receive mode
Problem
●
If you want to set FAX ONLY or TEL/FAX
mode:
—select the desired mode using feature
#77 (p. 59), and
—press to turn on
the AUTO ANSWER light.
●
If you want to set TEL mode:
—press to turn off
the AUTO ANSWER light.
●
The unit is not in AUTO ANSWER mode.
Press to turn on the
AUTO ANSWER light.
AUTO ANSWER
AUTO ANSWER
AUTO ANSWER
Cause & solution
ON
OFF
ON
Copying
Problem
Cause & solution
●
You cannot make a copy during programming. Make the
copy after programming or stop programming.
●
The glass or rollers are dirty. Clean them (p. 74).
The unit does not make a copy.
A black line, a white line or a
dirty pattern appears on the
copied document.
(continued)