5. Copier
34
5.2 More copying features
L Make sure that the {Copy} light is ON.
5.2.1 Zoom copy (enlargement / reduction)
1
Set the original (page 19).
2 {Enhanced Copy}
3 Press {<} or {>} repeatedly to select “ZOOM”. i
{Set}
4 Press {Enhanced Copy} repeatedly to select the
zoom rate that fits the size of your document and
recording paper.
– “ZOOM =100%”
– “50%”
– “200%”
– “LTR>A4”
– “A4>LTR”
– “LGL>A4”
– “LGL>LTR”
L If you select “ZOOM =100%”, press {V} or {^}
repeatedly to change the enlargement /
reduction rate by 1 % at a time from “25%” to
“400%”.
You can also enter the desired percentage
specifically by using the dial keys.
5 {Set}
6 If necessary, enter the number of copies (up to 99).
i {Start}
7 After you finish copying, press {Stop} to reset this
feature.
Note:
L Zoom copy is not available for N in 1 feature (page
35).
L You can hold the previous zoom setting (feature #468
on page 56).
L The unit will only enlarge the center of the upper part
of the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
Example: 150 % enlarged copy
Example: 70 % reduced copy
5.2.2 Collate copy
The unit can collate multiple copies in the same order as
the original document pages.
1 Set the original (page 19).
2 {Enhanced Copy}
3 Press {<} or {>} repeatedly to select “COLLATE”.
i {Set}
4 Press {V} or {^} repeatedly to display “ON”. i
{Set}
5 Enter the number of copies (up to 99). i {Start}
6 After you finish copying, press {Stop} to reset this
feature.
Example: Making 2 copies of a 4-page original
document
Note:
L The unit will store the documents into memory while
collating the copies. If memory becomes full while
storing, the unit will only print out the stored pages.
L You can hold the previous collate setting (feature
#469 on page 56).
Original document Enlarged copy
Original document Reduced copy
Collated pages Uncollated pages
4
3
2
1
4
3
2
1
4
4
3
3
2
2
1
1