Filter
Top Products
9. Programmable Features
62
Receiving a fax into the
computer
{#}{4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature
#448 on page 50).
{0} “OFF” (default): Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents in memory, and then transfer the
data after recognition of the connection.
{2} “CONNECTED”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will print the data.
Setting the computer for PC
fax reception
{#}{4}{4}{3}
To select the computer that will be used for receiving a fax. See page 22 for
details.
Sending legal size
documents using the scanner
glass
{#}{4}{4}{5}
{0} “OFF” (default): Deactivates this feature.
{1} “NEXT FAX”: Legal-size documents can be sent for the next fax
transmission using the scanner glass. After transmission, this setting will turn
OFF automatically.
{2} “ALWAYS”: Legal-size documents can be sent using the scanner glass
anytime.
Setting the fax preview mode
{#}{4}{4}{8}
See page 50 for details.
Setting the web fax preview
access code
{#}{4}{5}{0}
See page 50 for details.
Resetting fax features to their
default settings
{#}{4}{5}{9}
{0} “NO” (default)
{1} “YES”
To reset the fax features:
1. {Menu} i {#}{4}{5}{9}
2. Press {1} to select “YES”. i {Set} i {Set} i {Menu}
Note:
L The PC fax reception (feature #443 on page 22) will not be reset.
L If you select “YES”, the unit will print the received fax documents that have
been stored into memory.
Feature/Code Selection