Filter
Top Products
9. Programmable Features
65
Setting the font number in
PCL
{#}{7}{6}{9}
(KX-MB3020 only)
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1. {Menu} i {#}{7}{6}{9} i {Set}
2. Enter the font number from “000” to “054”, using the dial keypad.
L The default setting is “000”.
3. {Set} i {Menu}
Note:
L If the font source in PCL (feature #768 on page 64) is set to “DOWNLOAD
FONT”, the default setting is “001”.
L To print the font list, see page 98.
Setting the font pitch/point in
PCL
{#}{7}{7}{0}
(KX-MB3020 only)
To set the font pitch/point to be used in PCL printing.
1. {Menu} i {#}{7}{7}{0} i {Set}
2. Enter the font pitch from “00.44” to “99.99”, or the point from “004.00”
to “999.75”, using the dial keypad.
L The default pitch is “10.00” and the default point is “012.00”.
3. {Set} i {Menu}
Setting the symbol set in PCL
{#}{7}{7}{1}
(KX-MB3020 only)
To set the symbol set to be used in PCL printing.
1. {Menu} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {Set}
i {Menu}
Setting the line breaks in PCL
{#}{7}{7}{2}
(KX-MB3020 only)
To set each behavior when receiving CR, LF, and FF codes.
{1} “CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{2} “CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{3} “CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{7}{7}{3}
(KX-MB3020 only)
To set the length of time before the unit recovers if a memory overflow occurs.
{1} “OFF” (default): Deactivates this feature.
{2} “20s”: 20 seconds
{3} “30s”: 30 seconds
{4} “60s”: 60 seconds
{5} “90s”: 90 seconds
{6} “120s”: 120 seconds
Changing the data timeout
setting
{#}{7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {Menu} i {#}{7}{7}{4} i {Set}
2. Enter the desired data timeout setting from “005” seconds to “600”
seconds, using the dial keypad.
L The default setting is “060” seconds.
3. {Set} i {Menu}
Setting mutual A4/letter print
{#}{7}{7}{6}
This feature allows printing in A4-size even if letter-size recording paper is
loaded, and vice versa.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): Printing is possible between A4/letter-size.
Feature/Code Selection