Filter
Top Products
Paper Specifications
Paper which may be used with this unit must be within the specifications provided below.
Fanfold Paper
Width: 102–254 mm (4–10 in.)
Quality and number of sheets:
Type of paper
Sheets
Weight
in lbs in g/m²
Fine-quality paper 1 16–24 60–90
Non-carbon 2–5 11–14 (17
*1
) 41–53 (64
*1
)
Multi-layered with carbon 2 11–14 (17
*1
) 41–53 (64
*1
)
*1
Only for the last sheet
Note
• To insure optimum print quality, 60–82.5 g/m² (16–22 lbs.) is recommended for graphic printing.
• In multi-layered paper with carbon, the carbon is equivalent to a sheet of paper.
• "Weight in pounds" represents the weight of 500 [423 ´ 559 mm (17 ´ 22 in.)] sheets.
• The printer will handle multipart forms up to 0.36 mm (0.014 in.) thick. Up to 5 copies of 14 lbs. chemical
release paper can be used.
Single Sheets
Width: 102–297 mm (4–11.7 in.)
Height: 127–363 mm (5–14.3 in.)
Weight in pounds (g/m²): 53–90 g/m² (14–24 lbs)
Note
• Paper should be within operating temperature and humidity ranges at least 24 hours prior to use.
• Due to letter head varying in paper weight and construction, we cannot guarantee print quality and
paper handling for all types.
Envelopes
#6 and #10 size envelopes are recommended. Since envelopes vary in size, paper weight and construction,
we cannot guarantee print quality and paper handling for all types of envelopes.
Note
• To optimize print quality printing should not occur in areas where the edges overlap.
Operating Instructions 43
Appendix