Filter
Top Products
About Your Projector
12 - ENGLISH
Preparation
J
Top and front view
Projector
NOTE:
Do not cover the ventilation openings or place anything within 10 cm (4") of them as this may cause damage
or injury.
While the projector is not in use, attach the Lens cover to protect the lens.
POWER
Illuminates or flashes to
indicate the status of the
projector. (page 19)
LAMP TEMP
Illuminates or flashes to
indicate the temperature status
of the lamp unit. (page 36)
LUMINANCE SENSOR
Senses the luminance for the
LIGHT HARMONIZER feature.
(page 29)
POWER
Turn the POWER on/off.
(page 19)
Navigation buttons
Navigate through the menu
with FGHI
, ENTER and
RETURN. (page 26)
INPUT SELECT
Switch to cycle through the
INPUT SELECT method
options. (page 22)
MENU
Display the menu on screen.
Return to the previous menu in
menu mode. (page 26)
Turn the outer ring to adjust
the focus of the image.
(page 21)
Focus ring
Heated air comes out of this
opening.
Air exhaust port
Turn the inner ring to adjust
the image size. (page 21)
Zoom ring
Air intake port
Intake fresh air to control the
temperature inside.
Projection lens
Adjust the position of the
projected image.
Shift lever
Lens cover
Protects the Projection lens
from dust or dirt.
Remote control
signal receptor
Receive a signal from the
Remote control. (page 22)
Illuminates or flashes to
indicate the status of the lamp
unit. (page 36)
2.0 power zoom lens.
Control panel