Filter
Top Products
33
[Originating port number]
Select a port number to be used to receive the com-
mand alarm.
Available value: 1 - 65535
Default setting: 8181
Configure the settings relating to the alarm image [Alarm image setup]
Click the [Alarm] tab on the "Alarm setup" page. (☞ page 32)
The settings relating to the alarm image to be transmitted to the FTP server can be configured on this page. The
alarm image will be transmitted to the FTP server. To transmit alarm images to the FTP server, it is necessary to
configure the settings in advance. (☞ page 40)
Refer to pages 33 and 34 for further information about the settings relating to the alarm image and the alarm out
connector.
Important:
• Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat-
ed interval or period.
• Image capture size and image quality of "JPEG setup" on the [JPEG/MPEG-4] tab are applied for the alarm
image to be transmitted. (☞ page 25)
■ Alarm image setup
[To FTP setup]
When "To FTP setup" is clicked, the [FTP] tab of the
"Server setup" page will be displayed. (☞ page 40)
[Alarm image FTP transmission]
Select "ON" or "OFF" to determine whether or not to
transmit the alarm image to the FTP server.
Default setting: OFF
[Directory]
Enter the directory name where the alarm images are to
be saved.
For example, enter "/ALARM" to designate the directory
"ALARM" under the FTP root directory.
Number of characters that can be entered: 0 - 256
characters
Default setting: Blank
[File name]
Enter the file name used for the alarm image to be
transmitted to the FTP server. The file name will be as
follows.
File name: ["Entered file name" + "Time and date
(year/month/day/hour/minute/second)"] + "Serial
number"
Number of characters that can be entered: 1 - 8 char-
acters
Default setting: Blank
[Post alarm]
[Transmission interval]
Select a transmission interval for the alarm image FTP
transmission from the following.
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
Default setting: 1 fps
[Number of images]
Select the number of images to be transmitted from the
following.
10 pics/20 pics/ 30 pics/50 pics/100 pics/200 pics/
300 pics/500 pics/1000 pics/2000 pics/3000 pics/
5000 pics
Default setting: 100 pics