Filter
Top Products
44
[DDNS]
Select "ON" or "OFF" to determine whether or not to use
the DDNS function.
Default setting: OFF
[Host name]
Enter the host name to be used.
Number of characters that can be entered: 1 - 64
characters
Default setting: Blank
[User name]
Enter the user name (login name) to access the DDNS
server.
Number of characters that can be entered: 1 - 32
characters
Default setting: Blank
[Password]
Enter the password to access the DDNS server.
Number of characters that can be entered: 0 - 32
characters
Default setting: Blank
[Access interval]
Select the interval to access the DDNS server to check
the IP address and the host name from the following.
1 min/10 min/30 min/1 hour/6 hours/24 hours
Default setting: 1 hour
Configure the settings relating to DDNS [DDNS]
Click the [DDNS] tab on the "Network setup" page. (☞ page 41)
The settings relating to DDNS can be configured on this page.
When accessing the unit via the Internet from the network environment of which the global IP address is obtained
using DHCP, the DDNS function is necessary.
When using the DDNS function, it is possible to access with "Host name registered in the DDNS server. nmdns.
net". To use the DDNS function, it is necessary to connect to the dedicated DDNS server. Refer to the web site for
further information about the DDNS. Refer to the "Readme" file about the web site.
It is necessary to configure the host name, user name and password registered in the DDNS server.