Filter
Top Products
ENGLISH-21
Getting started
20-ENGLISH
Setting up range using the lens shift function
This projector can be placed in various places by controlling the shift lever at
the front side of the projector to move the lens in order to adjust the position
of the projected image.
BVertical lens shift
When shift lever is
moved down (full)
When shift lever is
moved up (full)
NOTE:
BTurn the shift lever right to secure the shift lever.
BWhen the lens has been shifted fully to the right or left, you will not be
able to shift the lens up or down.
When the lens has been shifted fully up or down, you will not be able to
shift the lens to the right or left.
BGenerally, the maximum picture quality is obtained when the lens is
moved to the center (horizontally and vertically).
BWhen the projector is tilted vertically and keystone correction needs to
be carried out, place the projector so that the center of the lens and the
center of the screen (vertical) are matched.
BProjector setting up range in relation to the screen
Projector
Screen
Projector set up range
(center of the lens)
BHorizontal lens shift
About 25% of the
screen (maximum)
About 25% of the
screen (maximum)
When shift lever is moved
to the left (full)
When shift lever is moved
to the right (full)
Screen
Screen
50%
V
50%
H
Center of the screen (vertical)
Center of the lens
* The values in the table are for the width and the height of the screen.
Vertical (V)
About 63%
About 50%
About 0%
About 0%
When the lens has been shifted fully
up or down.
When the center of the lens is placed
at the same height as the upper or
lower edge of the screen.
When the lens is shifted only to the
right or left.
About 8%
About 25%
Horizontal
shift range (H)
Shift lever operation range
About 63% of
the screen
(maximum)
About 63% of
the screen
(maximum)