Filter
Top Products
ENGLISH-69
Others
68-ENGLISH
Dimensions
<Units: mm (inch)>
Projection dimensions calculation methods
Dimensions such as projection distances can be calculated from the screen
diagonal length. (Units for calculations: m)
SD
SW
16:9
LW/LT
SH
Screen Width: SW=SDx0.872
Screen Height: SH=SDx0.490
Minimum Projection Distance: LW=1.2244xSD-0.056
Maximum Projection Distance: LT=2.4449xSD-0.056
*The values obtained from the formulas above are approximate.
Cable specifications
(When connected to a personal computer)
1
2
3
4
5
6
7
8
7
8
3
5
2
6
1
4
9
At the projector
At the computer
(DTE specifications)
Command Inquiry contents Parameter
000=OFF 001=ON
VID=VIDEO SVD=S-VIDEO
RG1=PC YUV=YPBPR1
HDM=HDMI CP1=YP
BPR
1
CP2=YP
BPR2
Power conditionQPW
Input signal QIN
Picture modeQPM
NAT=NATURAL NOR=NORMAL
DYN=DYNAMIC CN1=CINEMA1
CN2=CINEMA2 CN3=CINEMA3
VID=VIDEO
(Refer to page 33 for details.)
Shutter functionQSH 0=OFF 1=ON
Freeze functionQFZ 0=OFF 1=ON
Inquiry commands
54 (2-1/8˝)
335 (13-3/16˝)
82.9 (3-1/4˝)
84 (3-9/32˝)
104 (4-3/32˝)
95
255 (10-1/32˝)
270 (10-5/8˝)
Returning to the
default setting
OST
Use this command to return the setting to
the factory default. (page 43)
(Continued from previous page.)
Command Control contents Remarks
Picture mode
selection
VPM
Parameter
NAT=NATURAL NOR=NORMAL
DYN=DYNAMIC CN1=CINEMA1
CN2=CINEMA2 CN3=CINEMA3
VID=VIDEO
(Refer to page 33 for details.)