Filter
Top Products
ENGLISH-39
Adjustments and settings
Projecting sRGB-
compatible pictures
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following settings.
##
Press the
FF
or
GG
button to
select “PICTURE MODE”, and
then use the
II
or
HH
button to
select “NATURAL”.
$$
Press the
FF
or
GG
button to
select “COLOR TEMP.”, and
then use the
II
or
HH
button to
select “STANDARD”.
%%
Press the STD (standard)
button on the remote control
unit.
&&
Select the LAMP POWER item
in the OPTION menu by
pressing the
FF
or
GG
buttons
and set to “HIGH” by pressing
the
II
or
HH
buttons.
NOTE:
BsRGB is only enabled when
RGB signals are being input .
NOTE:
BThis should normally be set to
“AUTO1” or “AUTO2”. If the
signal is of such poor quality
that the correct format cannot
be automatically distinguished,
change the setting manually to
the required TV system.