Filter
Top Products
ENGLISH-63
Others
Connector pin wiring
B
The pin layout and signal names for the S-VIDEO IN connector are shown below.
Pin No. Signal
#
Earth (Luminance signal)
Earth (Color signal)
Luminance signal
Color signal
$
%
&
BThe pin layout and signal names for the RGB/YPBPR (RGB1 IN/RGB2 IN)
connector are shown below.
Pin No. Signal
#
R/PR
G/G·SYNC/Y
B/PB
SDA
$
%
.
/
HD/SYNC
0
VD
1
SCL
Pin + is spare.
Pins &–*, , and - are for earth.
Pins . and 1 functions are only valid when supported by the computer
#$
&%
External view
-1
#'
,(
External view
For 16:9 aspect ratios, the following formula can be used to calculate the
projection distance.
LW=0.031xSD/0.0254-0.068
LT=0.0393xSD/0.0254-0.066
Projection dimensions calculation methods
If the screen size (diagonal) is SD (m), then the following formula is used to
calculate the projection distance for the wide lens position (LW) and the
projection distance for the telephoto lens position (LT).
SD
SW
4:3
LW/LT
H1
SH
Minimum Projection Distance
Maximum Projection Distance
LW=0.034xSD/0.0254-0.068
LT=0.043xSD/0.0254-0.066
Minimum Projection Distance
Maximum Projection Distance