Filter
Top Products
Switching the projector on/off
20 - ENGLISH
Basic Operation
1. Switch the MAIN POWER on.
The power indicator lights up in RED.
2. Remove the Lens cover from the lens.
3. Press the POWER button.
The power indicator lights up in GREEN after
flashing for a while.
The STARTUP LOGO is displayed on the
screen.
1. Press the POWER button.
The confirmation screen is displayed.
To return to the projection, press ENTER to
select CANCEL or press MENU/RETURN.
2. Press I to select OK and press POWER or
ENTER.
The power indicator lights up in ORANGE while
cooling the lamp, then illuminates RED when it
is ready to switch off the MAIN POWER.
3. Switch off the MAIN POWER on the back of
the projector.
Switching on the projector
Power indicator
NOTE:
See page 34 about switching on/off the STARTUP LOGO.
Some small rattling or tinkling sound may be heard when starting up, but this is normal and does not affect
the performance of the projector.
Switching off the projector
Power indicator
NOTE:
Press the POWER twice or for a long duration to switch the power.