Filter
Top Products
ENGLISH - 9
Preparation
Before use
Make sure the following accessories are provided with your projector.
Do not subject the projector to excessive vibration or shocks.
The projector lens need to be handled with care.
Cover the lens with the lens cover when transporting the projector.
Avoid setting up in places which are subject to
vibration or shocks.
The internal parts can be damaged, which may
cause malfunctions or accidents.
Avoid setting up in places which are subject to
sudden temperature changes, such as near an air
conditioner.
The life of the lamp may be shortened or the
projector may be turned off. See “TEMP indicator” on
page 36.
Do not set up the projector near high-voltage power
lines or near motors.
The projector may be subject to electromagnetic
interference.
If installing the projector to the ceiling, ask a
qualified technician to carry out all installation
work.
You will need to purchase the separate installation kit
(Model No. ET-PKX100). Furthermore, all installation
work should only be carried out by a qualified
technician.
If using this projector at high elevations
(above 1 400 m), set the ALTITUDE to HIGH. See
“ALTITUDE” on page 35.
Failure to observe this may result in malfunctions or
the life of the lamp or the other components may be
shortened.
Accessories
Remote control (N2QAYB000064 x 1) AA batteries for Remote control (x 2)
Power cord for continental Europe (K2CG3FR00001 x 1)
Cautions when transporting
Cautions when installing