Filter
Top Products
ENGLISH -
33
Basic Operation
Basic operations by using the remote control
Using the AUTO SETUP
function
This function allows you to automatically adjust Input
search, Auto Keystone correction and [Auto PC
adjustment] during signal input from a computer.
Button
Press the <AUTO SETUP> button on the
remote control.
Note
For details, see “Setting” of Main menu. (
z
Æ
page 52)
Switching the input signal
You can switch the input signals to project.
Buttons
Press (<COMPUTER 1>,<COMPUTER 2>,
<VIDEO>, <S-VIDEO>, or <COMPONENT>)
button on the remote control.
COMPUTER 1
Switches to Computer 1(RGB)/
Computer 1(Scart) input.
COMPUTER 2
Switches to Computer 2(RGB)
input.
VIDEO
Switches to Video input.
S-VIDEO
Switches to Computer 1(S-video)
input.
COMPONENT
Switches to Computer 1
(Component) input.
Using the SCREEN button
This function allows you to select screen mode or
change the screen size.
Button
Press the <SCREEN> button on the
remote control.
Note
For details, see “Screen” of Main menu. (
z
Æ
page 48)
Using the KEYSTONE button
This function allows you to correct keystone distortion.
Button
If a projected picture still has keystone distortion after
pressing the <AUTO SETUP> button, correct the
image manually as follows:
Press the <KEYSTONE> button on the remote
control. The Keystone dialog box appears. Press
▲▼ to correct keystone distortion. The keystone
adjustment can be stored
(
Æ
page 49)
.