Filter
Top Products
Replacement
62
- ENGLISH
Maintenance
Attention
If the Projector Mount Base ET-PKL100B is applied, the supplied lter cover is unnecessary.
z
Attention
Turn off the power before you replace the air lter unit.
z
When attaching the air lter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air lter unit dropping.
Do not operate the projector with the lter removed. Dust may accumulate on the optical elements degrading
z
picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
Do not wash the lter with water or any other liquid matter. Otherwise the lter may be damaged.
z
Attaching the Filter Cover to the Projector
J
The supplied lter cover is designed for preventing dust accumulation on the lter when mounting the projector on
the ceiling.
Turn over the projector.1 )
Press the adjustable foot lock latch and pull out the adjustable foot, and then attach 2 )
the lter cover (supplied) to the projector (
Push the cover in the arrow direction as the Picture (1)
shown
).
And tie the string around the adjustable foot as Picture (1) shown.
Press the adjustable foot lock latch and pull in the adjustable foot.3 )
Attach the projector to the ceiling mount in accordance with the instruction 4 )
manuals which come with the ceiling mount as Picture (2) shown.
To Ceiling Mount
Filter Cover
(supplied)
Projector
Picture (1)
Picture (2)