Filter
Top Products
Setting
58
- ENGLISH
Settings
Filter counter
This function is used to set a frequency for the lter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ►or the <SELECT> button to 2 )
access the submenu items.
Filter counter
J
Show the total accumulated time of the lter use timer
setting.
Timer
J
To set a timer. When the projector reaches the
selected time the lter warning icon appears on the
screen.
Press ▲▼ to select [Timer] and then 1 )
press the <SELECT> button .
Press ▲▼ to set the Timer.2 )
Select from [Off/1000H/2000H/3000H/4000H]
z
depending on the use environment.
Filter counter reset
J
After replacing the lter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 )
reset].
Press the <SELECT> button. 2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
Press ▲▼ to select [Warning log].1 )
Press ► or the <SELECT> button to 2 )
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Note
When the [Factory default] function is executed, all
z
the warning log records will be deleted.
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery.For more details, visit http://
www.amx.com/.
Press ▲▼ to select [AMX D.D.].1 )
Press <SELECT> button to select [On] 2 )
or [Off] to allow the projector to be
detected by AMX Device Discovery.
Factory default
This function returns all setting values except for the
[User logo], [PIN code lock], [Logo PIN code lock],
[Lamp counter] and [Filter counter] to the factory
default settings.
Press ▲▼ to select [Factory default].1 )
Press the <SELECT> button.2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to return to [Factory
default].