Filter
Top Products
28
Press the menu button to open the [NETWORK] menu, select [Wired LAN] and then
press [OK].
Connecting with Wired LAN
Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing
any settings.
A Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
2
3
Set the details of network and select [ENTER].
As for network setting items, see page 52.
Confirm to your system administrator before changing any settings.
B Computer settings
4
Turn on the computer.
5
Make the network setting according to your system administrator.
If the projector settings are the default settings (See page 52), then the computer can be used with the following network
settings.
IP ADDRESS 192.168.10.101
SUBNETMASK 255.255.255.0
DEFAULT GATEWAY 192.168.10.1
6
If no projector is displayed, click [ ] to start searching by IP address. (See page 29)
7
Select a projector you want to connect on the <Projector Search> window ([S-MAP]
or [1-4/U]), and click [Connect]. (See pages 18, 19)
When the connection with the projector is established, the launcher appears.
(“Descriptionofthelauncher”→
See page 32)
Launch Wireless Manager ME 5.5