Panasonic TH-LB20NT Projector User Manual


 
36
Various projection methods
(cont.)
Check the status indication on the launcher to make sure that transmission is
possible ( ). (See page 32)
2
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small screens) is
displayed). (See page 35)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, the
screen will switch over to a full screen display.
1
Click [Live Mode] in the launcher menu.
4
• In the 4-screen multi style, the computer screens from all the computers connected to the projector can be transmitted to the
projector. (If an image from another computer has been sent to the image position where an image is already displayed, the
existing image is replaced by the new image.)
• Picture quality or other options can be set on the <Option> window by clicking [Option] in the launcher menu. (
See page 48)
• If the connection error occurs during projection, the message [“Live mode” is deactivated] will appear. Check the
communication environment, then restart projection by clicking launcher buttons.
4-screen multi style
Connect up to four computers to one projector, and then divide the projector screen into four parts, and simultaneously display
the screens for the four computers on the projector screen. (If the connection is completed, and input is via network.)
Select and click the projection position.
5
n Switching to a different position
Select and click a different projection position in step 4 above.
n Enlarged display
Click [Live Mode] and [ALL] from the launcher menu to display the PC
screen onto the entire projection screen. To return to the original display,
click [Live Mode] on the launcher and select original projection positions
with each computer.
nQuitting 4-screen multi-live
Click [ ] on the launcher.
Click [ ] on the launcher.
The computer image is transmitted to the selected quarter of the projection screen.
6
Click [ ].
The launcher menu will appear.
3
1
3
2
4
ALL
Live Mode
Selective Area Transmission
Display Change
Virtual Remocon
Pointer
AV Mute
WEB control
Select Access Port
Option
About Wireless Manager
End
Start/Pause
Stop