Filter
Top Products
Setting the Unit
28
By performing the Test Print feature, it is possible to
clean the printer head from this unit when scanned
images are not printed correctly (ex. certain areas
appear blank).
Once the printer head is cleaned, the following pattern
will be printed.
If the pattern is printed as shown below, the problem
has been fixed. If the pattern is not printed as shown
below, refer to the manual of the printer for details.
• This pattern is printed in color.
1
Press the Set-up Key .
• The set-up screen is displayed.
2
Press the Set-up Key ( ) repeatedly to select
the following item.
• If this item is not displayed, the unit does not
recognize the printer.
Make sure that the printer is connected
properly.
3
Press the Advance Key ( ).
• The printer head is cleaned and the pattern
shown above is printed.
4
Press the Mode Key ( ) to return to standby
mode.
Note
• If the test pattern is not printed correctly, it is time to
replace the ink cartridge. Refer to the manual of the
printer and replace the ink cartridge.
• For information regarding available printers, refer to
the following site:
http://panasonic.co.jp/pcc/products/en/eboard/
ub-5838c_info.htm
Testing the Printer
UB5838C-PJQXC0259ZA_mst.book 28 ページ ２００９年５月２６日 火曜日 午後２時５９分