Filter
Top Products
70
Advanced Internet Fax Features
Relayed Transmission
Printouts and Reports
When you use Relayed Transmission, relay station will send the following two reports to help you check and keep track
of your faxes.
1. Relay XMT Report (COMM. JOURNAL)
When the relay station finishes transmitting to the End Receiving Station, it will send a Comm. Journal to you when
the Fax Parameter No. 143 is set to "Always" or "Inc. Only", this tells you whether the transmission was
successful or not.
2. Transmission Journal
When the Relay Station receives instructions for a relayed transmission, a notification is emailed to the registered
manager (see "Setting Up Your machine as an Internet Relay Station" on page
63).
Sample Relay XMT Report (COMM. JOURNAL)
Explanation of Contents
NOTE
1. If you transmit through more than one Relay Station, you will receive a separate Result
Report.
************** -COMM. JOURNAL - ***************** DATE MMM-dd-yyyy **** TIME 15:00 ********
(1) (2) (3)
MODE = RELAYED TRANSMISSION START=MMM-dd 15:00 END=MMM-dd 15:00
FILE NO.= 050 (4)
(5) (6) (7) (8) (9) (10)
STN COMM. ONE-TOUCH/ STATION NAME/EMAIL ADDRESS/TELEPHONE NO. PAGES DURATION
NO. ABBR NO.
001 R-OK 4681111234 001/001 00:00:15
- PANASONIC -
***** UF-xxxx ************************ - HEAD OFFICE - ****** - 201 555 1212 - *******
(1) Indication of communication mode
(2) Start time of communication
(3) End time of communication
(4) File number : 001 to 999
(5) Sequential number of the stations
(6) Communication result : "R-OK" indicates that the Relayed XMT Request was successful.
"3-digit Info Code" (see pages 113–115) indicates that the
communication has failed.
(7) One-Touch/ABBR NO.
(8) Telephone Number, Email Address or
Station Name of the end receiving
station
(9) Number of pages transmitted : 3-digit number represents the number of pages successfully transmitted.
(10) Duration of Communication