Filter
Top Products
97
Setting
Your Machine
NOTE
1. The email address and the telephone number cannot be programmed via email when:
• Auto Dialer Number has been used for communication reservation.
• Received documents are stored in the image data memory of the machine.
• While the machine is communicating or printing.
2. When the email address, and telephone number are programmed via email, a program result
email is sent back.
3. Some email applications automatically insert a line feed in the middle of a line when the
number of characters in a line exceed a specific number. Turn "Off" the automatic line feed, or
define the number of characters per line to prevent a line feed, or the data will be ignored.
(2) @begin to @end block : Defines the Auto Dialer to be set in section (2) between @begin to @end block.
Edit, Delete or Register the information.
Separate each data field with a semicolon (;). (If the remaining fields are to remain
blank, insert a semi-colon (;) for each blank field)
The data string for each station should be defined within a single line.
The syntax is: <Entry-number>;<Station-name>;<Station-address>;
<Routing-subaddress>;<Routing-id-number>;
(a) Entry-number: One-Touch, ABBR. No. or Program Keys to be programmed
001 to 200: indicates ABBR. No.s 001 to 200 (200 stations maximum)
(001 to 920: When the SD Media Card Memory is installed)
2001 to 2080: indicates One-Touch numbers from 01 to 80
Program Keys (P1 to P80 common used with the One-Touch keys)
(b) Station-name: Name of the station being programmed (15 alpha-numeric
characters maximum)
(c) Station-address: email address or telephone number of the station being
programmed after the hash sign(#).
(d) Routing-subaddress: sub-address to be used for routing (20-digit maximum)
(e) Routing-id-number: TSI to be used for routing (20-digit maximum)
(3) @program to @end : Defines the Program Keys stored as a Group Key or POP Access Key to be set in
section (3) between @program to @end block.
Edit, Delete or Register the information.
(a) Program Key: P01 - P80 (Common used with the One-Touch Keys)
(b) POP3: station name
(c) POP: The syntax used to set the Program Key as a POP Access Key.
(d) POP User-name: Name of the POP user account (40 alpha-numeric characters
maximum)
(e) POP Password: POP Password (10 alpha-numeric characters maximum)
(f) Set whether the emails on the POP Server are deleted after retrieving the
emails.
(g) Station-name as a Group Key: Name of the station being programmed (15
alpha-numeric characters maximum)
(h) GROUP: The syntax used to set the Program Key as a Group Key
(i) Entry-number: One-Touch, ABBR. No. or Program Keys to be programmed
001 to 200: indicates ABBR. No.s 001 to 200 (200 stations maximum)
(001 to 920: When the SD Memory Card is installed)
2001 to 2080: indicates One-Touch numbers from 01 to 80
(4) This header must be deleted before the email is sent to your machine for reprogramming of Auto Dialer.
(5) The information following the "#" sign is ignored by your machine, therefore, you can leave it as is or delete it if you
wish.