DISPLAY
This potentiometer is used to adjust the contrast of the LCD display for optimum viewing under various lighting
conditions.
PRINT
The PRINT potentiometer is used to adjust the amount of heat (i.e., power) applied to the head for printing. It
provides a continuous range of adjustment. Maximum print darkness is obtained by turning the potentiometer all
the way clockwise and a maximum counterclockwise setting will give the lightest print.
NOTE: The PRINT potentiometer adjustment will affect the darkness in all of the command code speed and
darkness ranges.
PANDUIT TDP4*H GMTDPH-MAN
Page 3-9
Section 3: Configuration