Filter
Top Products
Hotwire 6210, 6211, and 6381 User’s Guide
3.2.7 Assigning IP to your PC automatically by DHCP
To use the CPE’s DHCP feature (only available on Models 6211 and 6381), click in the radio button labeled
Obtain an IP address automatically instead of Use the following IP address in the above procedures.
By default, the LAN port IP address of the CPE is 192.168.1.1. (You can change this address, or another
address can be assigned by your ISP.)
Now that the hardware installation is complete, proceed to Chapter 4: Using the Web Interface
20 April 2004 6210-A2-GB21-00