Paradyne 8546 Modem User Manual


 
TM
1
8546-A2-GN10-20
October 1997
HotWire 8546 Digital Subscriber Line (DSL) Card
Installation Instructions
Document Number 8546-A2-GN10-20
October 1997
What is a 8546 DSL Card?
A Digital Subscriber Line (DSL) 8546 card is a circuit card assembly (CCA) that
contains four Rate Adaptive Digital Subscriber Line (RADSL) ports, an Ethernet
interface to the Internet Service Provider (ISP), and a processor. The processor
controls the RADSL ports and forwards the packet traffic to and from the Ethernet
and DSL interfaces. When the 8546 DSL card is used in a HotWire 8600 or 8800
DSL Access Multiplexer (DSLAM) chassis connected to a HotWire 5446 Remote
Termination Unit (RTU), it provides high-speed Internet or Intranet access with
dynamic IP addressing and enhanced security over traditional twisted-pair
telephone wiring.
!
HANDLING PRECAUTIONS FOR
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.
Package Checklist
Verify that your package contains the following:
- DSL CCA
- Warranty card
Tools Required
- Small- to medium-size flat-blade screwdriver to install the DSL card.
496-15104