Paradyne 8546 Modem User Manual


 
26
97-15323
50
1
25
11
8546-A2-GN10-20
October 1997
HotWire 8800 DSLAM Telco 50-pin Connector Pinouts for DSL Loops
and POTS Splitters
The three Telco 50-pin connectors on the 8800 DSLAM Interface Module
provides the two-wire loop interface from each 8546 DSL port to either the
POTS splitter shelf or, if the loop is not being shared with POTS, then to the
MDF. The following table lists the pin assignments for each of these interfaces.
Note that Pins 25 and 50 are
not
used.
CONNECTOR #1
Slots 1–6
(DSL Card,
Port #)
CONNECTOR #2
Slots 7–12
(DSL Card,
Port #)
CONNECTOR #3
Slots 13–18
(DSL Card,
Port #)
CONNECTOR
PINS
(Tip, Ring)
Card 1, Port 1 Card 7, Port 1 Card 13, Port 1 1, 26
Card 1, Port 2 Card 7, Port 2 Card 13, Port 2 2, 27
Card 1, Port 3 Card 7, Port 3 Card 13, Port 3 3, 28
Card 1, Port 4 Card 7, Port 4 Card 13, Port 4 4, 29
Card 2, Port 1 Card 8, Port 1 Card 14, Port 1 5, 30
Card 2, Port 2 Card 8, Port 2 Card 14, Port 2 6, 31
Card 2, Port 3 Card 8, Port 3 Card 14, Port 3 7, 32
Card 2, Port 4 Card 8, Port 4 Card 14, Port 4 8, 33
Card 3, Port 1 Card 9, Port 1 Card 15, Port 1 9, 34
Card 3, Port 2 Card 9, Port 2 Card 15, Port 2 10, 35
Card 3, Port 3 Card 9, Port 3 Card 15, Port 3 11, 36
Card 3, Port 4 Card 9, Port 4 Card 15, Port 4 12, 37
Card 4, Port 1 Card 10, Port 1 Card 16, Port 1 13, 38
Card 4, Port 2 Card 10, Port 2 Card 16, Port 2 14, 39
Card 4, Port 3 Card 10, Port 3 Card 16, Port 3 15, 40
Card 4, Port 4 Card 10, Port 4 Card 16, Port 4 16, 41
Card 5, Port 1 Card 11, Port 1 Card 17, Port 1 17, 42
Card 5, Port 2 Card 11, Port 2 Card 17, Port 2 18, 43
Card 5, Port 3 Card 11, Port 3 Card 17, Port 3 19, 44
Card 5, Port 4 Card 11, Port 4 Card 17, Port 4 20, 45
Card 6, Port 1 Card 12, Port 1 Card 18, Port 1 21, 46
Card 6, Port 2 Card 12, Port 2 Card 18, Port 2 22, 47
Card 6, Port 3 Card 12, Port 3 Card 18, Port 3 23, 48
Card 6, Port 4 Card 12, Port 4 Card 18, Port 4 24, 49