Filter
Top Products
Configuration Options
4-31
9820-A2-GB20-20
June 2000
Table 4-9. PVC Connection Options (3 of 3)
AlternateDestination DLCI
Possible Settings: 16 – 1007
Default Setting: Initially blank; no default.
Specifies the alternate destination DLCI for a frame relay interface. The DLCI must be
defined and cannot be part of a PVC connection or management link. For multiplexed
DLCIs, at least one EDLCI must be unconnected for the DLCI to be a valid selection.
NOTE: Alternate Destination DLCI has no value if Alternate Destination Link
contains no value.
Display Conditions
– This option appears only for Model 9820-45M.
16 – 1007 – Specifies the DLCI number.
Alternate Destination EDLCI
Possible Settings: 0 – 62
Default Setting: Initially blank; no default.
Specifies the alternate destination Embedded Data Link Connection Identifier (EDLCI)
for a frame relay interface when a multiplexed DLCI record is selected as one end of a
connection.
Display Conditions
– This option appears only for Model 9820-45M, only when the
Alternate Destination DLCI contains a multiplexed DLCI record number.
0 – 62 – Specifies the EDLCI number.