Filter
Top Products
3. Configuration
3-38 February 2003 8335-A2-GB20-70
Configuring Rate Shaping (Models 8335, 8365, 8385)
Configure rate shaping for ATM traffic being sent to the SCM card. To access the
Rate Shaping screen, follow this menu selection sequence:
Configuration ATM Switch Rate Shaping
(A-E-E)
The Rate Shaping Configuration screen appears.
Procedure
To configure rate shaping:
1. Select the interface to be changed (dsl1:1 through dsl24:1 on the
Model 8385).
2. Enter the rate shape value limit for WAN traffic (512 kbps to 46080 kbps in
64 kbps increments), or d to disable rate shaping. Setting the rate shape limit
to 0 or d turns rate shaping off, which is the same a setting the limit to
46080 kbps. The default value is 27000 kbps.
3. Press Ctrl-z and save the changes as prompted.