Paradyne 6301 Network Router User Manual


 
Index
6300-A2-GB20-10 November 2003
IN-5
show
alarms, 6-1
arp command, 3-6
bridge, A-25
commands, A-24
console, A-25
DHCP relays and servers, A-26
interface, 5-3
NAT basic and NAPT configurations, A-28
PPPoE, A-29
PPPoE configuration, A-29
spanning-tree topology, A-29
statistics, 5-3
system log and system information, 6-2, A-32
traps, A-33
show commands for
interface status, 5-3
statistics, 5-3
Simple Network Management Protocol (SNMP), C-1
agent overview, C-1
simultaneous NAT and NAPT, 4-8
SNAP encapsulation, 3-2
spanning-tree
show command, A-29
standard
MIBs, C-3
mode, 3-6, 3-13
static mapping, 3-7
statistics
bridge, A-31
clearing, 5-3, A-23
DSL, A-31
Ethernet, A-30
IP processing, A-31
performance, 5-3
PPP, A-32
PPPoE, A-32
show, 5-3
TFTP, A-32
status
interfaces, 5-3
LED, 5-2
syntax, conventions used in commands, A-2
syslog, 6-1–6-2
enable, 6-2
events, 6-4
IP address, 6-3
message display, 6-5
show command, 6-2, A-32
system
ID, A-33
identity, 2-3, 2-6
log, 6-1–6-2
T
Telnet access, 2-1, 2-4
Telnet commands, A-21
terminal emulation settings, D-1
test, Ping results, 6-6
TFTP statistics, A-32
timeout for show ARP, A-24
topology, show spanning-tree, A-29
TraceRoute, 6-7
Transmission Control Protocol (TCP), A-12–A-13
traps, C-2
show command, A-33
troubleshooting, 6-1
U
unnumbered DSL interface
IP address, A-6
network configuration, 4-10
scenario, 3-3
upstream static route, creating or deleting, A-8
User Datagram Protocol (UDP), A-12–A-13
user login, 2-3
V
Virtual Circuit (VC) multiplexing, A-5
VNET mode, 3-6, 3-13