Patton electronic 1058 Modem User Manual


 
6
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.
2.1 FEATURES
Easy to install standalone VLINK modems—
no configuration required
Auto-sensing full or half-duplex Ethernet
Auto-sensing 10/100Base-T
Extends network connections up to 4,652 ft (1,418 m) over 2-wire 24-
AWG unconditioned lines
12.5 Mbps symmetric line rate; 10 Mbps data rate
POTS/ISDN splitter on board
Transparent operation
LED indicators for Power, Ethernet Link & Activity, VLINK & Quality of Line
(QOL)
Surge suppression up to 20 kA (8/20
µ
s)
Available in rack-mount or standalone configurations
Made in the USA
2.2 DESCRIPTION
The Patton Electronics Model 1058/CO* and 1058/CP VDSL* modems
provide high-speed LAN connections between peered Ethernet LANs,
remote PC’s, or any other network enabled 10/100Base-T device.
Operating in pairs, a Model 1058/CO (central office) located at one end of
the LAN extension and a Model 1058/CP (customer premise) at the other
end, these units can automatically forward LAN broadcasts, multicasts,
and frames across a 2-wire voice-grade twisted-pair link. The data is
passed transparently (that is, unmodified) through the 1058s. The 1058s
* Only Models 1058DV/CO and 1058DV/CP have POTS/ISDN split-
ters on board.