Patton electronic 1068 Network Card User Manual


 
5
The safety advice in the documentation accompanying this product shall
be obeyed. The conformity to the above directive is indicated by the CE
sign on the device.
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid
and insured to Patton Electronics. All returns must have a Return Materi-
als Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:
Tel:
+1
(301) 975-1007
Email:
support@patton.com
URL:
http://www.patton.com
Note
Packages received without an RMA number will not be
accepted.
WARNING
This device is NOT intended nor approved for connec-
tion to the PSTN. It is intended only for connection to
customer premise equipment.
WARNING
This device contains no user serviceable parts. The
equipment shall be returned to Patton Electronics for
repairs, or repaired by qualified service personnel.
The external power adapter shall be a listed Limited
Power Source. Ensure that the power cable used
meets all applicable standards for the country in
which it is to be installed, and that it is connected to
a wall outlet which has earth ground. The mains out-
let that is utilized to power the devise shall be within
10 feet (3 meters) of the device, shall be easily
accessible, and protected by a circuit breaker.
Do not work on the system or connect or disconnect
cables during periods of lightning activity.