Patton electronic 1068 Network Card User Manual


 
6
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.
2.1 FEATURES
Easy to install standalone VLINK modems (no configuration required)
Auto-MDIX Ethernet
Auto-sensing full or half-duplex Ethernet
Auto-sensing 10/100Base-TX
Extends network connections up to 6,000 ft (1.83 km) over 2-wire 24-
AWG unconditioned lines
Switch selectable line rates up to 16.67 Mbps
7 symmetric or asymmetric settings via DIP switch
POTS/ISDN splitter on board
Transparent operation
LED indicators for Power, Ethernet Link & Activity, VLINK link & Quality of
Line (QOL)
Surge suppression up to 20 kA (8/20
µ
s)
WARNING
The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica-
tion with respect to voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability
In accordance with the requirements of council direc-
tive 2002/96/EC on Waste of Electrical and Electronic
Equipment (WEEE), ensure that at end-of-life you sepa-
rate this product from other waste and scrap and deliver
to the WEEE collection system in your country for recy-
cling.