Patton electronic 2172A Switch User Manual


 
4
1.0 WARRANTY INFORMATION
Patton Electronics
warrants all Model 2172A components to be free
from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of the shipment.
This warranty is limited to defects in workmanship or materials, and does
not cover customer damage, abuse or unauthorized modification. If this
product fails or does not performs as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronics
be liable for any damages incurred by the use of this
product. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product.
Patton Electronics
spe-
cifically disclaims all other warranties, expressed or implied, and the
installation or use of this product shall be deemed an acceptance of
these terms by the user.
Note
Conformity documents of all Patton products can be viewed
online at www.patton.com under the appropriate product page.
1.1 REGULATORY INFORMATION
EMC Directive:
FCC Part 15, Class A
EN55022, Class A
EN55024
Low-Voltage Direcive (Safety):
UL60950-1/CSA C22.2 No. 60950-1
IEC/EN60950-1 2nd Edition
AS/NZS 60950-1
A-tick
1.2 RADIO AND TV INTERFERENCE (FCC PART 15)
This device generates and uses radio frequency energy, and if not
installed and used properly-that is, in strict accordance with the manufac-
turer's instructions-may cause interference to radio and television recep-
tion. The device has been tested and found to comply with the limits for a
Class A computing device in accordance with specifications in Subpart B