Patton electronic 2172A Switch User Manual


 
5
of Part 15 of FCC rules, which are designed to provide reasonable pro-
tection from such interference in a commercial installation. However,
there is no guarantee that interference will not occur in a particular instal-
lation. If the device does cause interference to radio or television recep-
tion, which can be determined by disconnecting the unit, the user is
encouraged to try to correct the interference by one or more of the follow-
ing measures: moving the computing equipment away from the receiver,
re-orienting the receiving antenna and/or plugging the receiving equip-
ment into a different AC outlet (such that the computing equipment and
receiver are on different branches).
1.3 CE DECLARATION OF CONFORMITY
This device conforms to the requirements of Council Directive
2004/108/EC on the approximation of the laws of the member states
relating to electromagnetic compatibility; and Council Directive
2006/95/EC on the approximation of the laws of the member states relat-
ing to electrical equipment designed for use within certain voltage limits.
The safety advice in the documentation accompanying this device shall
be obeyed. The conformity to the above directive is indicated by CE mark
on the device.
1.4 AUTHORIZED EUROPEAN REPRESENTATIVE
D R M Green
European Compliance Services Limited.
Avalon House, Marcham Road
Abingdon,
Oxon OX14 1UD, UK
1.5 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid
and insured to Patton Electronics. All returns must have a Return Materi-
als Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:
•Tel:
+1
(301) 975-1007
Email:
support@patton.com
URL:
http://www.patton.com
Note
Packages received without an RMA number will not be
accepted.