Filter
Top Products
Configuration 52
SmartLink M-ATA Getting Started Guide 6 • System
Configuration
Figure 30. Configuration window
Syslog Service
Enable Syslog
Enable or disable system logging. During normal operations, Syslog should be turned off. A sample Syslog
record of a complete call is shown below.
SYSLOG
11-09-2005 11:28:17 Local0.Info 209.49.110.185 Nov 09
08:28:34 syslog: [1234] On-Hook [7190]
11-09-2005 11:28:06 Local0.Info 209.49.110.185 Nov 09
08:28:23 syslog: [1234] Call-Out [7190]
11-09-2005 11:27:50 Local0.Info 209.49.110.185 Nov 09
08:28:07 syslog: [1234] Call-Out [190]
11-09-2005 11:16:32 Local0.Info 209.49.110.185 Nov 09
08:16:49 syslog: [1234] On-Hook [555]
11-09-2005 11:16:16 Local0.Info 209.49.110.185 Nov 09
08:16:33 syslog: [1234] Call-Out [7190]
11-09-2005 11:15:38 Mail.Emerg 209.49.110.185 Jan 01
00:00:00 syslog: DownloadConfig:No, DownloadImage:No
11-09-2005 11:15:36 Local0.Info 209.49.110.185 Jan 01
00:00:00 syslog: Check Autoupgrade
Syslog Server
Specify the syslog server IP address or DNS name. This feature specifies the server for logging SmartLink M-
ATA system information and critical events.