Filter
Top Products
3. Press L or R to see the other options. After you display the
option you want, press E. Press e twice to exit to the
Main menu. You can only enable or disable
backfeed/extended backfeed. You cannot set the backfeed or
dispense position. Your System Administrator should refer to
the optional Packet Reference Manual to set the backeed or
dispense position.
Verifier
The verifier scans and checks the quality of bar codes as they are
printed. The optional verifier must be purchased separately.
This option only appears if you are using a
9850 printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
l Verifier
2. Press E to set the verifier option. You will see the current
setting, for example:
VERIFIER
Disabled r
3. Press l or r to see the other option. After you display the
option you want, press E. Press e twice to exit to the
Main menu. For additional verifier information, refer to your
verifier’s manual.
2-12 Setting Supply Options