Filter
Top Products
C4680M-A (8/11) 11
Software Configuration
SOFTWARE UPDATES
The UDI5000 Series uses the same procedure to update its software as any other device on the Endura system. Refer to the WS5200 Advanced
System Management Software Configuration manual for instructions on updating software.
SYSTEM SETTING CONFIGURATION FOR THE UDI5000 SERIES
After the UDI5000 Series is connected to the Endura network and the power is turned on, the device is discovered automatically on the network.
A dynamic IP address is assigned to the UDI5000 Series through the network Dynamic Host Configuration Protocol (DHCP) server. Use the Endura
Utilities or the WS5200 advanced system management software to verify that the UDI5000 Series is available on the system. System settings for
the UDI5000 Series are configured through the Web application that is provided within the unit. This application is accessed through a
Microsoft
®
Internet Explorer
®
Web browser window by entering the IP address assigned to the unit. Refer to the configuration manual that is
available on the resource disc for information on configuring the units.