Filter
Top Products
6 C4680M-A (8/11)
Description
The Endura
®
UDI5000 Series universal device interface provides a flexible integration platform between third-party IP sources and the Endura IP
video surveillance system.
The UDI5000-CAM models can accommodate IP camera streaming for as many as 16 standard resolution cameras and several megapixel
cameras from most manufacturers. Any combination and any mix of IP camera type and manufacturer is supported to reach a maximum bit rate,
frame rate, and resolution. These cameras can be distributed throughout the network and then associated with a UDI5000 Series to translate
network communication packets into a standard that is compatible with the Endura system. As more third-party sources are added to the system,
they can be associated with additional UDI5000 Series units.
When third-party IP cameras are associated with the universal device interface, live and recorded video are accessible in the Endura system, and
all camera functions are available from any viewing station on the system.
The UDI5000-MTRX provides users with a powerful means by which to leverage investments in legacy analog systems and integrations, while
paving the way to leverage the benefits afforded by today’s IP and megapixel camera technologies. The UDI5000-MTRX has three operation
modes to integrate ASCII interfaces into an Endura system, extend the operational life of analog matrix switchers by pulling digital video from
standard resolution and megapixel IP devices, or provide the functionality and operator interface of the analog matrix without the cost and
complexity of the matrix hardware.
MODELS
COMPATIBLE PRODUCTS
PARTS LIST
The following parts are supplied with the device.
USER-SUPPLIED PARTS LIST
A Phillips screwdriver (if mounting the unit into a rack) and Cat5e or better network cable are needed but not supplied.
The UDI5000-MTRX is designed to support third-party components, some of which might require additional parts to operate properly. For
example, you might need to purchase a serial to Ethernet converter or a video down converter (sometimes referred to as a DVI to BNC converter).
Consult with your Pelco sales representative to determine if you need to purchase these or other parts to support your implementation.
UDI5000-CAM Universal device interface for use with third-party cameras
UDI5000-MTRX Universal device interface for use as an ASCII interface, matrix digital decoder (MDD), or V9700 virtual matrix
controller
Endura System Components The UDI5000 Series is fully compatible with Endura 2.x or later components. The UDI5000-MTRX is compatible
with existing CM9700 matrix systems. In V9700 mode, the system can include CM9700-ALM alarm interface
units and CM9700-KBD keyboards.
Third-Party Cameras The UDI5000-CAM is compatible with several camera vendors. For an updated list of supported cameras, go to
www.pelco.com.
Third-Party ASCII Systems The UDI5000-MTRX converts Pelco ASCII commands and Pelco P protocol commands into Endura messages.
Qty Description
1 UDI5000 Series universal device interface
4 Rubber mounting feet, attached
1 Power cord (either 1 United States standard, European standard, United Kingdom standard, Australian standard, or Argentinian standard)
NOTE: Units shipped to China do not include power cords.
1 Documentation packet containing the following items:
2 Installation manuals (1 English, 1 Chinese)
1 Important Safety Instructions (multilingual)
1 Resource disc with additional documentation and supporting software