Filter
Top Products
20 C1552M-C (7/07)
Installation
PARTS LIST
USER-SUPPLIED PARTS
In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:
• One or two VGA or SVGA monitors for each VMX300(-E) workstation (the second monitor is optional but recommended). Monitors are not
included with the VMX300(-E), but can be ordered separately from Pelco; any VGA or SVGA monitor can be used.
• (-1 models and -4 models) BNC video cable for connecting analog video sources to the VMX300(-E) workstation.
• Uninterruptible power supply (UPS).
NOTE: When connecting the workstation to a 230 VAC or higher power source, the use of an UPS, such as model PW9120 700i
(manufactured by Powerware
®
) or equivalent, is required to comply with CE-marking requirements per EMC Directive 89/336/EEC.
The following parts may be needed, depending on the types of devices you are connecting to the VMX300(-E) workstation (refer to External
Devices on page 27 for details on device connections and user-supplied parts):
• Shielded twisted pairs cable that meets or exceeds the basic requirements for EIA RS-232 applications
• Null modem cable
• RS-232 to RS-422 serial port adapter
Qty Description
1 VMX300 workstation
1Mouse
1 Keyboard
1 VGA adapter
1 RCA-to-BNC video input adapter (-1 models)
2 Power cords (one USA standard and one European standard)
2 Adjustable support rails with screws
2 Mounting brackets with screws and nuts
2 Rack mount ears with screws
2Keys
1 VMX300 Resource CD